Design Concept Series: MSLA Modeling Sand, for LED/LCD Printers
SORRY, OUT of STOCK, team is on it...
Please check back at a later stage.
Or find the SUBSTITUTE as described below.
Price:
$70.00
Product Description
Finest details, dimensionally accurate, fast print time. Matte finish is easy on the eyes, closely matched to Carbon 3D DRP10 Stone color, excellent for dental models.
Modeling Sand’s Tensile Strength increased 18%; Elongation doubled vs. popular MSLA Modeling Dental resin.
Product Features
- For all LED/LCD type printers, such as AnyCubic, Elegoo, Phrozen,…
- Tensile strength (57-63Mpa) / Elongation (3-7%)
- VOC Free, very low odor
- SKU: MMD-R001SD
- For detailed print instructions, please refer to Printing Tips
Product Details
| Color: | Sand |
|---|---|
| Size: | 1 Kg |
| Material: | Acrylate-based Polymer for 3D Printing |
| Tensile(MPa): | 57 - 63 |
| Elongation(%): | 3 - 7 |
| Impact(J/m): | 23 |
| Hardness(Shore): | 88 |
| Flexural Strength(MPa): | 100 - 115 |
| Flexure Modulus (MPa): | 2000 - 2200 |
| HDT(°F/°C): | 147.6/64.2 |
| Tear Strength(kN/m): | - |
| Compression(%): | - |
| Viscosity at 77°F/25°C: | 420 - 500 |
| Layer thickness(um): | - |
| Post Cure: | MERCURY X CURE 30min |
