Material Properties Table
For DLP Resins: Specialty
|
MODELING
GRAY V3 |
MODELING
SAND |
MODELING
TAN V3 |
MODELING
CLEAR |
MODELING
WHITE V2 |
SPECIALTY
CLEAR |
|
| Group | ||||||
|---|---|---|---|---|---|---|
| Tensile(MPa) | 53 - 58 | 58 - 65 | 52 - 59 | 62 - 70 | 57 - 63 | 67 - 70 |
| Elongation(%) | 1 - 2 | 3 - 4 | 1 - 2 | 1 - 5 | 1 - 2 | 4 - 9 |
| Impact(J/m) | 17 - 25 | 20 - 24 | 23 - 28 | 28 - 30 | 21 - 26 | - |
| Hardness(Shore) | 85 - 87D | 90 - 93D | 88 - 90D | 86 - 88D | 86 - 90D | 88 - 90D |
| Flexure Strength(MPa) | 105 - 115 | 95 - 115 | 105 - 118 | 82 - 90 | 100 - 105 | 115 - 125 |
| Flexure Modulus(MPa) | 1900 - 2100 | 1800 - 2200 | 1950 - 2100 | 1700 - 2000 | 2100 - 2200 | 2000 - 2300 |
| HDT(°F/°C) | - | 153/67 | - | 130.82/54.9 | 148/64.5 | - |
| Viscosity(cP) | 390 - 450 | 380 - 430 | 380 - 410 | 340 - 380 | 420 - 480 | 550 - 650 |
| Layer thickness(um): | - | - | - | - | 50, 100, and 170 | - |
| PostCure: | - | ProCure 30°C, 30min. or ProCure2: Key guide | - | - | ProCure 30°C, 30min | - |
| ISO 10993-5: | - | - | - | - | - | Pass |
| ISO 10993-10: | - | - | - | - | - | Pass |
| ISO 10993-23: | - | - | - | - | - | Pass |
Modeling Comparable to SprintRay Resins
High resolution, good strength and strong material performance for designers and engineers of all types to perfect their designs & concepts.